*** MIDAS logfile (05SEPpl1.2) *** Fr, 13 Oct 2006 17:30:42 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 13 Oct 2006 17:30:56 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 061013 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 348.91 stddev = 1.97 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_061013 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 2.17 1716.6 1717.2 879.7 0.10 0.12 1.95 2 4.34 3423.2 3422.9 1694.9 -0.15 -0.15 2.02 3 8.67 6847.6 6848.0 3399.5 -0.09 -0.09 2.01 4 13.00 10272.2 10272.8 5076.2 -0.08 -0.08 2.02 5 19.50 15410.3 15411.2 7680.2 -0.06 -0.06 2.01 6 26.01 20559.1 20558.5 9996.2 0.00 -0.00 2.06 7 32.51 25703.2 25704.5 12312.0 0.02 0.02 2.09 8 43.34 34299.4 34300.8 16518.4 0.11 0.11 2.08 9 54.17 42855.2 42857.5 20031.5 0.06 0.06 2.14 10 65.01 51436.5 51437.9 24036.8 0.08 0.08 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3687 to 110463 e- Average count rate measured: 791 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.15 +/- 0.02 e-/ADU RON = 4.24 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay