*** MIDAS logfile (03SEPpl1.2) *** Fr, 01 Oct 2004 15:57:45 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 01 Oct 2004 15:58:01 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 041001 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 350.40 stddev = 2.07 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_45_041001 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1708.8 1708.6 888.9 0.09 0.10 1.92 2 6.16 3410.3 3410.0 1737.0 -0.11 -0.12 1.96 3 12.31 6820.4 6820.9 3450.1 -0.11 -0.10 1.98 4 18.47 10232.7 10232.8 5096.1 -0.08 -0.09 2.01 5 27.70 15352.7 15353.3 7640.0 -0.06 -0.06 2.01 6 36.93 20480.3 20481.1 10106.4 -0.00 -0.01 2.03 7 46.16 25605.0 25606.6 12225.8 0.01 0.01 2.09 8 61.54 34171.1 34172.7 16316.3 0.11 0.10 2.09 9 76.93 42691.4 42693.8 20011.3 0.05 0.05 2.13 10 92.31 51256.8 51260.4 23764.9 0.11 0.11 2.16 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3697 to 110897 e- Average count rate measured: 555 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.16 +/- 0.02 e-/ADU RON = 4.47 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay