*** MIDAS logfile (05SEPpl1.2) *** Fr, 13 Oct 2006 16:45:01 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 13 Oct 2006 16:45:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 061013 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 284.31 stddev = 1.98 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_061013 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1722.4 1723.1 863.7 0.04 0.05 1.99 2 1.09 3426.0 3426.4 1739.8 -0.18 -0.18 1.97 3 2.17 6867.0 6867.3 3526.7 0.10 0.09 1.95 4 3.25 10275.9 10278.9 5118.5 -0.06 -0.06 2.01 5 4.88 15429.2 15430.4 7727.7 0.05 0.04 2.00 6 6.50 20552.4 20553.5 10037.9 -0.05 -0.05 2.05 7 8.13 25714.2 25718.1 12849.0 0.05 0.05 2.00 8 10.84 34268.9 34271.1 17016.9 0.01 0.01 2.01 9 13.55 42837.2 42840.6 21081.7 0.02 0.02 2.03 10 16.25 51406.8 51410.9 25896.2 0.03 0.03 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3458 to 103182 e- Average count rate measured: 3162 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.98 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay