*** MIDAS logfile (05SEPpl1.2) *** Fr, 17 Feb 2006 15:26:30 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 17 Feb 2006 15:26:44 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 060217 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 285.99 stddev = 2.00 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_46_060217 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1698.7 1698.4 824.5 0.07 0.07 2.06 2 1.54 3386.0 3386.0 1707.1 0.01 0.01 1.98 3 3.08 6760.2 6760.9 3536.9 -0.06 -0.04 1.91 4 4.62 10138.6 10137.3 4971.8 -0.02 -0.02 2.04 5 6.93 15189.3 15187.9 7538.2 -0.12 -0.12 2.01 6 9.23 20262.1 20263.1 10245.2 -0.05 -0.05 1.98 7 11.54 25343.2 25341.1 12456.2 0.02 0.02 2.03 8 15.39 33785.8 33786.9 16869.1 0.01 0.02 2.00 9 19.23 42249.7 42242.9 21413.3 0.06 0.05 1.97 10 23.08 50701.9 50696.7 25043.4 0.07 0.06 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3410 to 101788 e- Average count rate measured: 2195 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 4.02 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.07/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay