*** MIDAS logfile (03SEPpl1.2) *** Tu, 26 Oct 2004 14:19:24 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Tu, 26 Oct 2004 14:19:40 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 041026 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 285.99 stddev = 2.05 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_041026 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1666.9 1667.3 863.9 0.03 0.05 1.93 2 1.54 3318.4 3317.7 1707.1 -0.03 -0.05 1.94 3 3.08 6625.9 6624.1 3394.8 -0.04 -0.05 1.95 4 4.62 9932.5 9932.0 5156.1 -0.01 -0.02 1.93 5 6.93 14877.7 14880.4 7499.9 -0.12 -0.11 1.98 6 9.23 19850.7 19848.4 9948.4 -0.03 -0.04 2.00 7 11.54 24822.7 24823.5 12300.3 0.02 0.03 2.02 8 15.39 33096.6 33096.9 16187.1 0.03 0.03 2.04 9 19.23 41381.7 41386.5 20263.4 0.07 0.08 2.04 10 23.08 49660.3 49660.4 24545.0 0.08 0.08 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3410 to 101575 e- Average count rate measured: 2150 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.05 +/- 0.01 e-/ADU RON = 4.19 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay