*** MIDAS logfile (03SEPpl1.2) *** Mo, 18 Oct 2004 19:27:38 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Mo, 18 Oct 2004 19:27:55 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 041018 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 285.96 stddev = 2.05 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_041018 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1666.5 1664.7 864.1 0.01 0.06 1.93 2 1.54 3314.6 3313.3 1692.0 -0.05 -0.02 1.96 3 3.08 6615.4 6611.8 3337.4 -0.04 -0.07 1.98 4 4.62 9917.3 9915.7 5034.3 -0.01 -0.01 1.97 5 6.93 14852.7 14854.5 7587.8 -0.12 -0.11 1.96 6 9.23 19813.0 19815.5 10124.7 -0.05 -0.04 1.96 7 11.54 24778.5 24780.3 12652.8 0.03 0.02 1.96 8 15.39 33039.3 33039.3 16550.3 0.04 0.03 2.00 9 19.23 41314.8 41313.4 20819.7 0.09 0.07 1.98 10 23.08 49575.5 49576.3 25067.9 0.09 0.08 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3305 to 98381 e- Average count rate measured: 2146 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 4.06 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay