*** MIDAS logfile (03SEPpl1.2) *** Fr, 08 Oct 2004 13:26:34 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 08 Oct 2004 13:26:49 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 041008 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 286.60 stddev = 2.19 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_041008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1668.8 1667.4 859.3 0.03 -0.00 1.94 2 1.54 3318.3 3319.6 1714.6 -0.09 -0.08 1.94 3 3.08 6624.7 6626.0 3426.7 -0.10 -0.08 1.93 4 4.62 9945.3 9942.5 4993.2 0.06 0.02 1.99 5 6.93 14896.6 14896.7 7606.9 -0.04 -0.05 1.96 6 9.23 19875.2 19873.0 10014.1 0.04 0.03 1.98 7 11.54 24829.5 24852.7 12534.0 0.00 0.09 1.98 8 15.39 33102.6 33100.1 16563.4 0.00 -0.01 2.00 9 19.23 41399.2 41395.2 20748.9 0.06 0.05 2.00 10 23.08 49665.9 49660.0 24705.8 0.04 0.03 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3353 to 99827 e- Average count rate measured: 2151 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 4.41 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.09 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay