*** MIDAS logfile (03SEPpl1.2) *** Fr, 01 Oct 2004 15:15:31 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 01 Oct 2004 15:15:47 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 041001 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 285.54 stddev = 2.06 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_041001 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1718.4 1720.4 891.8 0.02 0.07 1.93 2 1.54 3426.4 3423.3 1791.3 0.07 0.01 1.91 3 3.08 6831.8 6829.4 3444.1 -0.05 -0.07 1.98 4 4.62 10240.5 10243.1 5150.7 -0.02 -0.01 1.99 5 6.93 15340.5 15341.5 7843.0 -0.12 -0.12 1.96 6 9.23 20464.4 20466.2 10437.2 -0.05 -0.05 1.96 7 11.54 25591.2 25594.5 12961.5 0.01 0.02 1.97 8 15.39 34126.2 34121.7 17233.4 0.03 0.02 1.98 9 19.23 42666.5 42671.1 21309.1 0.06 0.06 2.00 10 23.08 51199.5 51204.4 25020.0 0.06 0.07 2.05 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3490 to 103916 e- Average count rate measured: 2217 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 4.18 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.07/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay