*** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:10:13 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:10:30 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 040331 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 285.39 stddev = 2.15 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_040331 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1791.9 1794.3 955.4 0.05 0.03 1.88 2 1.54 3567.4 3568.9 1832.3 -0.01 -0.04 1.95 3 3.08 7119.0 7118.6 3700.3 -0.07 -0.08 1.92 4 4.62 10678.3 10677.8 5470.9 0.00 -0.00 1.95 5 6.93 15991.3 15991.0 8163.8 -0.12 -0.11 1.96 6 9.23 21338.1 21338.9 10608.6 -0.03 -0.01 2.01 7 11.54 26680.1 26680.2 13773.7 0.02 0.04 1.94 8 15.39 35575.6 35570.9 17734.9 0.04 0.04 2.01 9 19.23 44470.4 44472.1 22412.0 0.05 0.07 1.98 10 23.08 53364.1 53363.9 27206.1 0.06 0.07 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3548 to 105608 e- Average count rate measured: 2310 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 4.25 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.06/-0.11 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay