*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 01 Feb 2004 17:49:44 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 01 Feb 2004 17:50:48 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 040201 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 284.27 stddev = 2.05 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_040201 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1841.3 1842.4 956.2 -0.03 0.03 1.93 2 1.54 3669.7 3670.0 1868.5 0.02 0.02 1.96 3 3.08 7320.4 7322.5 3670.8 -0.07 -0.06 1.99 4 4.62 10980.6 10978.8 5478.5 0.00 -0.01 2.00 5 6.93 16445.5 16443.8 8473.8 -0.11 -0.13 1.94 6 9.23 21943.0 21939.3 11105.3 -0.02 -0.04 1.98 7 11.54 27435.1 27433.6 13813.3 0.03 0.01 1.99 8 15.39 36587.8 36591.9 18370.5 0.05 0.05 1.99 9 19.23 45728.7 45731.0 23092.9 0.05 0.05 1.98 10 23.08 54889.0 54893.4 26102.3 0.08 0.08 2.10 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3784 to 112764 e- Average count rate measured: 2376 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.05 +/- 0.03 e-/ADU RON = 4.22 +/- 0.07 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = 0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.08/-0.12 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay