*** MIDAS logfile (05SEPpl1.2) *** Su, 11 Nov 2007 14:22:42 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 11 Nov 2007 14:22:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071111 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 356.52 stddev = 1.97 FIERA temperature = 273.15 K There were 2 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_45_071111 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 2.17 1611.2 1611.3 763.3 0.15 0.15 2.11 2 4.34 3211.6 3212.0 1554.9 -0.21 -0.20 2.07 3 8.67 6429.7 6430.2 3064.5 -0.10 -0.10 2.10 4 13.00 9643.4 9643.4 4630.4 -0.13 -0.13 2.08 5 19.51 14470.5 14471.6 7002.6 -0.09 -0.09 2.07 6 26.01 19304.0 19303.8 9349.0 -0.04 -0.04 2.06 7 32.51 24142.2 24143.1 11718.7 0.01 0.01 2.06 8 43.34 32217.3 32217.7 15526.8 0.10 0.10 2.07 9 54.17 40285.9 40287.5 19089.8 0.14 0.14 2.11 10 65.01 48359.5 48358.5 22571.8 0.17 0.16 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3424 to 102777 e- Average count rate measured: 743 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.13 +/- 0.02 e-/ADU RON = 4.20 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay