*** MIDAS logfile (05SEPpl1.2) *** Fr, 01 Jun 2007   17:00:35   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 01 Jun 2007   17:00:49   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070601 IN normcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 356.48 stddev =   1.96 
               FIERA temperature = 273.15 K                   
      There were 2 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_normcd_45_070601 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      2.17    1676.1    1674.7     808.1      0.13      0.11      2.07
        2      4.34    3341.2    3341.4    1584.7     -0.20     -0.17      2.11
        3      8.67    6687.5    6687.4    3209.1     -0.11     -0.11      2.08
        4     13.00   10031.2   10031.6    4916.7     -0.12     -0.12      2.04
        5     19.51   15052.1   15052.3    7239.1     -0.09     -0.09      2.08
        6     26.01   20082.3   20081.7    9681.3     -0.02     -0.03      2.07
        7     32.51   25109.2   25111.8   12152.2      0.00      0.01      2.07
        8     43.34   33515.9   33515.8   16130.0      0.11      0.11      2.08
        9     54.17   41896.8   41899.8   19909.7      0.12      0.12      2.10
       10     65.01   50308.6   50311.4   23450.1      0.18      0.18      2.15
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3564 to 107015 e-
      Average count rate measured: 773 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.13 +/-   0.02 e-/ADU
 
      RON    =   4.18 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.005 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.18/-0.19 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay