*** MIDAS logfile (05SEPpl1.2) *** We, 02 May 2007   15:05:55   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 02 May 2007   15:06:10   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070502 IN normcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 356.13 stddev =   1.97 
               FIERA temperature = 273.15 K                   
      There were 2 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_normcd_45_070502 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      2.17    1684.1    1684.1     812.9      0.15      0.17      2.07
        2      4.34    3354.3    3353.9    1618.8     -0.24     -0.25      2.07
        3      8.67    6718.6    6718.1    3243.7     -0.08     -0.08      2.07
        4     13.00   10073.0   10072.0    4843.4     -0.14     -0.14      2.08
        5     19.51   15118.5   15117.4    7282.7     -0.08     -0.08      2.08
        6     26.01   20167.1   20166.0    9704.4     -0.03     -0.03      2.08
        7     32.51   25224.9   25222.9   12167.5      0.03      0.03      2.07
        8     43.34   33650.2   33648.0   16077.2      0.09      0.08      2.09
        9     54.17   42099.1   42100.1   19845.6      0.17      0.18      2.12
       10     65.01   50494.5   50490.5   23910.6      0.12      0.12      2.11
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3564 to 106843 e-
      Average count rate measured: 776 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.12 +/-   0.01 e-/ADU
 
      RON    =   4.17 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.18/-0.25 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay