*** MIDAS logfile (05SEPpl1.2) *** Su, 04 Feb 2007   17:25:09   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 04 Feb 2007   17:25:23   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070204 IN normcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 355.53 stddev =   1.98 
               FIERA temperature = 273.15 K                   
      There were 2 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_normcd_45_070204 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      2.17    1705.6    1705.2     824.0      0.16      0.14      2.07
        2      4.34    3400.1    3401.0    1625.7     -0.20     -0.17      2.09
        3      8.67    6807.2    6806.7    3304.7     -0.10     -0.12      2.06
        4     13.00   10210.8   10210.4    4929.5     -0.11     -0.12      2.07
        5     19.51   15321.4   15322.3    7403.8     -0.09     -0.09      2.07
        6     26.01   20439.5   20441.4    9790.5     -0.03     -0.03      2.09
        7     32.51   25559.7   25561.4   12213.2      0.00      0.01      2.09
        8     43.34   34113.4   34113.6   16313.5      0.10      0.10      2.09
        9     54.17   42645.2   42649.1   20194.4      0.11      0.12      2.11
       10     65.01   51197.5   51199.3   23881.2      0.16      0.16      2.14
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3637 to 109190 e-
      Average count rate measured: 786 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.13 +/-   0.01 e-/ADU
 
      RON    =   4.23 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.005 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.19 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay