*** MIDAS logfile (03SEPpl1.2) *** Sa, 08 Oct 2005 12:30:30 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 08 Oct 2005 12:30:48 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 051008 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 356.57 stddev = 1.99 FIERA temperature = 273.15 K There were 2 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_45_051008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1694.4 1693.8 818.1 0.16 0.15 2.07 2 6.16 3376.9 3377.1 1603.8 -0.23 -0.21 2.11 3 12.31 6764.1 6763.2 3251.8 -0.09 -0.09 2.08 4 18.47 10141.0 10140.7 4878.6 -0.14 -0.14 2.08 5 27.70 15223.1 15221.9 7267.4 -0.07 -0.07 2.09 6 36.93 20304.5 20303.4 9814.3 -0.03 -0.03 2.07 7 46.16 25398.5 25397.7 12089.8 0.04 0.04 2.10 8 61.54 33876.1 33874.2 16400.1 0.07 0.07 2.07 9 76.93 42394.9 42393.1 19957.6 0.19 0.18 2.12 10 92.31 50836.6 50831.2 23832.9 0.11 0.10 2.13 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3599 to 107983 e- Average count rate measured: 550 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.12 +/- 0.01 e-/ADU RON = 4.23 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.006 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay