*** MIDAS logfile (03SEPpl1.2) *** Fr, 08 Oct 2004 14:09:02 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 08 Oct 2004 14:09:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 041008 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 357.02 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_041008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1648.1 1647.6 773.1 0.14 0.12 2.13 2 6.16 3287.7 3288.5 1556.1 -0.19 -0.17 2.11 3 12.31 6582.7 6582.1 3126.6 -0.12 -0.13 2.11 4 18.47 9874.7 9873.8 4757.3 -0.12 -0.13 2.08 5 27.70 14818.7 14820.0 7145.4 -0.08 -0.07 2.07 6 36.93 19770.0 19769.1 9488.7 -0.03 -0.03 2.08 7 46.16 24724.5 24724.7 11974.1 0.02 0.02 2.06 8 61.54 32990.8 32991.7 15814.1 0.09 0.09 2.09 9 76.93 41258.2 41258.8 19629.6 0.14 0.14 2.10 10 92.31 49520.6 49519.9 23158.5 0.16 0.16 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3494 to 104999 e- Average count rate measured: 536 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.12 +/- 0.01 e-/ADU RON = 4.16 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.008 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay