*** MIDAS logfile (03SEPpl1.2) *** Tu, 24 Aug 2004 13:38:58 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Tu, 24 Aug 2004 13:39:13 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040824 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 354.42 stddev = 1.99 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_040824 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1568.0 1567.9 730.7 0.12 0.14 2.15 2 6.16 3129.9 3129.0 1455.2 -0.16 -0.17 2.15 3 12.31 6264.4 6264.7 2958.3 -0.12 -0.11 2.12 4 18.47 9397.6 9396.6 4490.5 -0.12 -0.13 2.09 5 27.70 14102.4 14102.6 6834.7 -0.08 -0.08 2.06 6 36.93 18813.7 18813.0 9147.1 -0.03 -0.04 2.06 7 46.16 23526.3 23528.4 11325.4 0.01 0.01 2.08 8 61.54 31396.9 31398.6 14968.6 0.09 0.09 2.10 9 76.93 39258.7 39260.6 18374.6 0.13 0.12 2.14 10 92.31 47129.6 47132.7 22392.3 0.16 0.16 2.10 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3314 to 99619 e- Average count rate measured: 510 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.11 +/- 0.01 e-/ADU RON = 4.21 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.009 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay