*** MIDAS logfile (03SEPpl1.2) *** Su, 08 Aug 2004 13:35:35 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 08 Aug 2004 13:35:51 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040808 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 355.62 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_040808 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1643.0 1642.4 767.8 0.11 0.12 2.14 2 6.16 3279.4 3278.5 1531.8 -0.16 -0.16 2.14 3 12.31 6563.7 6563.4 3077.6 -0.12 -0.12 2.13 4 18.47 9845.9 9845.4 4728.8 -0.12 -0.13 2.08 5 27.70 14776.5 14775.9 7108.8 -0.08 -0.08 2.08 6 36.93 19712.5 19711.6 9530.4 -0.03 -0.03 2.07 7 46.16 24651.3 24651.9 11953.9 0.01 0.01 2.06 8 61.54 32895.1 32895.8 15703.7 0.09 0.09 2.09 9 76.93 41132.6 41133.7 19550.1 0.12 0.12 2.10 10 92.31 49381.6 49385.2 23065.4 0.17 0.17 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3486 to 104787 e- Average count rate measured: 534 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.12 +/- 0.02 e-/ADU RON = 4.17 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.009 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay