*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 07 Jun 2004 15:10:57 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 07 Jun 2004 15:11:14 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040607 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 356.90 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_040607 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1607.4 1607.3 739.4 0.17 0.15 2.17 2 6.16 3204.2 3204.4 1508.9 -0.25 -0.24 2.12 3 12.31 6421.5 6421.3 3059.9 -0.08 -0.07 2.10 4 18.47 9626.3 9625.9 4611.0 -0.15 -0.15 2.09 5 27.70 14452.1 14451.3 6990.8 -0.07 -0.06 2.07 6 36.93 19276.5 19274.0 9346.5 -0.03 -0.04 2.06 7 46.16 24115.0 24113.3 11580.7 0.04 0.05 2.08 8 61.54 32158.8 32156.6 15440.7 0.06 0.06 2.08 9 76.93 40258.8 40254.3 19002.5 0.21 0.21 2.12 10 92.31 48260.3 48255.9 22464.5 0.10 0.10 2.15 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3426 to 102861 e- Average count rate measured: 522 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.13 +/- 0.02 e-/ADU RON = 4.18 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.008 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.21/-0.25 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay