*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 07 May 2004 17:39:00 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 07 May 2004 17:39:17 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040507 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 356.40 stddev = 1.97 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_040507 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1692.8 1692.6 798.2 0.17 0.17 2.12 2 6.16 3373.5 3373.7 1603.0 -0.24 -0.23 2.10 3 12.31 6759.6 6758.2 3192.1 -0.08 -0.09 2.12 4 18.47 10132.8 10131.9 4833.8 -0.16 -0.16 2.10 5 27.70 15212.4 15211.2 7366.7 -0.07 -0.07 2.07 6 36.93 20291.5 20289.4 9865.5 -0.04 -0.04 2.06 7 46.16 25384.5 25382.2 12244.4 0.04 0.04 2.07 8 61.54 33855.9 33853.1 15934.8 0.07 0.07 2.12 9 76.93 42372.9 42369.7 20127.4 0.19 0.20 2.11 10 92.31 50805.3 50801.0 23605.6 0.11 0.11 2.15 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3615 to 108515 e- Average count rate measured: 550 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.14 +/- 0.02 e-/ADU RON = 4.21 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.007 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.19/-0.23 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay