*** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:56:11 Page 1 *** MIDAS logfile (vers. 02SEPpl1.3) *** We, 31 Mar 2004 17:56:28 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#46 TAKEN ON 040331 IN normcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 356.65 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_normcd_46_040331 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 3.08 1699.4 1699.5 788.7 0.12 0.12 2.15 2 6.16 3393.6 3393.9 1567.6 -0.14 -0.14 2.16 3 12.31 6791.7 6792.4 3262.9 -0.13 -0.12 2.08 4 18.47 10190.0 10189.8 4871.7 -0.12 -0.13 2.09 5 27.70 15291.9 15292.4 7355.2 -0.09 -0.09 2.08 6 36.93 20402.9 20403.4 9862.8 -0.03 -0.03 2.07 7 46.16 25513.2 25513.4 12298.8 0.01 0.00 2.07 8 61.54 34050.0 34052.7 16051.3 0.10 0.10 2.12 9 76.93 42568.1 42569.2 20142.3 0.11 0.11 2.11 10 92.31 51115.6 51120.6 23896.8 0.17 0.18 2.14 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3620 to 108886 e- Average count rate measured: 553 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.13 +/- 0.01 e-/ADU RON = 4.17 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.010 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.18/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay