*** MIDAS logfile (05SEPpl1.2) *** Sa, 09 Feb 2008   13:32:45   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 09 Feb 2008   13:32:59   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 080209 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 297.41 stddev =   1.86 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_080209 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1616.2    1617.1     756.4      0.07      0.11      2.14
        2      1.09    3217.7    3217.6    1581.0     -0.21     -0.21      2.04
        3      2.17    6455.5    6458.2    3092.5      0.06      0.07      2.09
        4      3.25    9668.6    9667.1    4650.3     -0.09     -0.11      2.08
        5      4.88   14518.3   14519.9    7126.8      0.02      0.03      2.04
        6      6.50   19341.3   19343.4    9462.7     -0.07     -0.07      2.04
        7      8.13   24199.5   24198.1   12195.5      0.03      0.01      1.98
        8     10.84   32263.1   32258.2   16473.5      0.02     -0.00      1.96
        9     13.55   40344.2   40341.5   20562.2      0.06      0.05      1.96
       10     16.25   48441.5   48442.2   23784.3      0.12      0.11      2.04
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3216 to 96374 e-
      Average count rate measured: 2977 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.02 e-/ADU
 
      RON    =   3.70 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.12/-0.21 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay