*** MIDAS logfile (05SEPpl1.2) *** Th, 10 Jan 2008 13:55:02 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 10 Jan 2008 13:55:16 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 080110 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.20 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_080110 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1622.8 1622.9 777.9 0.09 0.09 2.09 2 1.09 3232.1 3231.5 1495.3 -0.17 -0.20 2.16 3 2.17 6480.8 6479.5 3173.6 0.05 0.04 2.04 4 3.25 9704.0 9704.6 4641.5 -0.10 -0.10 2.09 5 4.88 14571.7 14573.2 7167.6 0.01 0.02 2.03 6 6.50 19412.4 19417.8 9552.0 -0.08 -0.06 2.03 7 8.13 24291.4 24291.9 12209.8 0.02 0.02 1.99 8 10.84 32385.6 32386.0 16393.8 0.02 0.02 1.98 9 13.55 40488.0 40490.7 20202.5 0.03 0.03 2.00 10 16.25 48631.9 48637.5 24514.4 0.13 0.14 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3207 to 96123 e- Average count rate measured: 2989 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.67 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay