*** MIDAS logfile (05SEPpl1.2) *** We, 12 Dec 2007 13:04:06 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 12 Dec 2007 13:04:20 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071212 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.09 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071212 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1605.4 1605.0 763.3 0.15 0.13 2.10 2 1.09 3192.8 3194.4 1523.5 -0.22 -0.22 2.10 3 2.17 6408.1 6408.9 3232.5 0.07 0.06 1.98 4 3.25 9594.2 9594.6 4491.7 -0.11 -0.11 2.14 5 4.88 14403.3 14407.5 7139.7 -0.01 0.00 2.02 6 6.50 19195.2 19197.8 9297.2 -0.08 -0.08 2.06 7 8.13 24018.1 24022.1 11940.8 0.03 0.03 2.01 8 10.84 32016.6 32019.3 16559.4 0.01 0.01 1.93 9 13.55 40041.4 40045.6 20039.4 0.05 0.06 2.00 10 16.25 48077.4 48078.2 24135.2 0.12 0.11 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3170 to 94939 e- Average count rate measured: 2955 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.02 e-/ADU RON = 3.68 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay