*** MIDAS logfile (05SEPpl1.2) *** Sa, 01 Dec 2007   12:59:46   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 01 Dec 2007   13:00:00   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 071201 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.19 stddev =   1.87 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_071201 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1596.5    1599.5     766.8      0.12      0.07      2.08
        2      1.09    3182.5    3184.9    1547.2     -0.21     -0.24      2.06
        3      2.17    6389.9    6389.8    3069.0      0.08      0.05      2.08
        4      3.25    9566.3    9568.5    4726.5     -0.11     -0.10      2.02
        5      4.88   14368.9   14369.0    7132.4      0.02      0.02      2.01
        6      6.50   19144.7   19145.7    9417.8     -0.08     -0.06      2.03
        7      8.13   23952.7   23957.7   11858.9      0.02      0.05      2.02
        8     10.84   31930.4   31929.9   15826.5     -0.00      0.01      2.02
        9     13.55   39942.0   39944.2   19362.7      0.07      0.09      2.06
       10     16.25   47946.0   47942.9   23707.0      0.10      0.11      2.02
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3247 to 97417 e-
      Average count rate measured: 2947 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.03 +/-   0.01 e-/ADU
 
      RON    =   3.81 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.12/-0.22 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay