*** MIDAS logfile (05SEPpl1.2) *** Th, 22 Nov 2007 13:28:00 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 22 Nov 2007 13:28:14 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071122 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.98 stddev = 1.94 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071122 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1612.0 1609.1 781.9 0.11 0.04 2.06 2 1.09 3206.5 3208.7 1594.3 -0.22 -0.18 2.01 3 2.17 6435.1 6433.4 3132.9 0.07 0.04 2.05 4 3.25 9635.9 9636.0 4724.8 -0.10 -0.09 2.04 5 4.88 14469.3 14466.8 7121.3 0.01 0.01 2.03 6 6.50 19277.7 19278.8 9594.2 -0.07 -0.07 2.01 7 8.13 24119.6 24123.1 11986.1 0.02 0.04 2.01 8 10.84 32150.7 32155.1 16180.3 0.00 0.02 1.99 9 13.55 40216.3 40216.3 20826.4 0.07 0.07 1.93 10 16.25 48274.4 48278.8 23576.8 0.10 0.12 2.05 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3213 to 96309 e- Average count rate measured: 2967 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.03 e-/ADU RON = 3.87 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay