*** MIDAS logfile (05SEPpl1.2) *** We, 14 Nov 2007 15:36:18 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 14 Nov 2007 15:36:32 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071114 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.86 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071114 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1600.6 1601.4 761.0 0.12 0.17 2.10 2 1.09 3191.0 3191.0 1513.0 -0.22 -0.21 2.11 3 2.17 6405.9 6405.1 3045.9 0.10 0.09 2.10 4 3.25 9589.8 9589.4 4626.2 -0.10 -0.11 2.07 5 4.88 14404.0 14401.7 7078.4 0.02 0.01 2.03 6 6.50 19190.4 19188.9 9754.5 -0.08 -0.08 1.97 7 8.13 24014.8 24011.9 12114.1 0.04 0.03 1.98 8 10.84 32000.2 31994.1 15900.0 -0.02 -0.03 2.01 9 13.55 40041.6 40037.1 19586.7 0.08 0.07 2.04 10 16.25 48038.8 48041.1 23461.9 0.06 0.07 2.05 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3255 to 97675 e- Average count rate measured: 2954 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.81 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay