*** MIDAS logfile (05SEPpl1.2) *** Su, 11 Nov 2007 13:44:37 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 11 Nov 2007 13:44:51 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071111 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.97 stddev = 1.84 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071111 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1612.5 1614.8 776.0 0.07 0.12 2.08 2 1.09 3210.8 3210.8 1572.9 -0.29 -0.29 2.04 3 2.17 6448.9 6445.1 3094.0 0.08 0.04 2.08 4 3.25 9651.3 9652.4 4712.7 -0.11 -0.10 2.05 5 4.88 14495.1 14496.4 7038.1 0.02 0.03 2.06 6 6.50 19313.5 19313.9 9545.3 -0.06 -0.06 2.02 7 8.13 24167.3 24165.8 12065.3 0.05 0.04 2.00 8 10.84 32212.5 32209.6 15778.2 0.02 0.01 2.04 9 13.55 40290.5 40286.8 19909.1 0.08 0.07 2.02 10 16.25 48369.9 48372.8 24087.4 0.13 0.13 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3245 to 97278 e- Average count rate measured: 2973 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.71 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.29 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay