*** MIDAS logfile (05SEPpl1.2) *** Sa, 03 Nov 2007 14:26:51 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 03 Nov 2007 14:27:06 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071103 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.79 stddev = 1.85 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071103 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1614.8 1612.6 758.8 0.14 0.07 2.13 2 1.09 3213.6 3213.8 1534.6 -0.20 -0.19 2.09 3 2.17 6444.7 6446.1 3100.6 0.05 0.06 2.08 4 3.25 9651.5 9650.4 4786.0 -0.10 -0.10 2.02 5 4.88 14492.1 14492.8 7151.9 0.00 0.02 2.03 6 6.50 19308.2 19310.6 9535.5 -0.08 -0.06 2.02 7 8.13 24163.6 24161.8 12004.0 0.03 0.04 2.01 8 10.84 32203.8 32202.5 16171.9 0.00 0.00 1.99 9 13.55 40275.7 40279.7 20247.3 0.05 0.06 1.99 10 16.25 48354.9 48355.8 23856.7 0.10 0.11 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3232 to 96846 e- Average count rate measured: 2972 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.01 e-/ADU RON = 3.71 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay