*** MIDAS logfile (05SEPpl1.2) *** Mo, 29 Oct 2007 12:00:01 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 29 Oct 2007 12:00:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 071029 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.86 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_071029 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1614.4 1613.3 782.8 0.09 0.02 2.06 2 1.09 3214.7 3218.0 1561.7 -0.24 -0.18 2.06 3 2.17 6453.1 6453.5 3146.6 0.06 0.07 2.05 4 3.25 9661.4 9659.7 4747.2 -0.10 -0.10 2.04 5 4.88 14507.9 14508.9 7202.9 0.02 0.02 2.01 6 6.50 19327.8 19328.9 9694.8 -0.08 -0.07 1.99 7 8.13 24187.2 24188.3 11776.1 0.04 0.04 2.05 8 10.84 32239.9 32241.0 16579.9 0.01 0.02 1.94 9 13.55 40319.0 40319.5 19810.4 0.06 0.06 2.04 10 16.25 48414.7 48416.2 23715.8 0.13 0.13 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3265 to 97955 e- Average count rate measured: 2975 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.02 e-/ADU RON = 3.77 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay