*** MIDAS logfile (05SEPpl1.2) *** Fr, 19 Oct 2007   13:17:42   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 19 Oct 2007   13:17:56   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 071019 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.14 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_071019 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1592.2    1592.2     774.4      0.09      0.09      2.06
        2      1.09    3176.4    3176.0    1537.3     -0.17     -0.19      2.07
        3      2.17    6374.0    6372.4    3152.8      0.09      0.07      2.02
        4      3.25    9542.0    9538.4    4689.7     -0.11     -0.13      2.03
        5      4.88   14331.4   14329.3    6966.6      0.01      0.01      2.06
        6      6.50   19095.8   19095.8    9437.3     -0.08     -0.07      2.02
        7      8.13   23892.5   23896.6   11846.5      0.02      0.04      2.02
        8     10.84   31851.4   31848.8   15928.4      0.00      0.01      2.00
        9     13.55   39836.7   39837.8   19520.3      0.06      0.07      2.04
       10     16.25   47827.0   47823.0   23820.6      0.11      0.11      2.01
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3205 to 96268 e-
      Average count rate measured: 2940 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.01 +/-   0.01 e-/ADU
 
      RON    =   3.78 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.11/-0.18 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay