*** MIDAS logfile (05SEPpl1.2) *** We, 26 Sep 2007   17:00:42   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 26 Sep 2007   17:00:56   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070926 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.22 stddev =   1.91 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070926 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1613.5    1613.4     773.7      0.12      0.11      2.09
        2      1.09    3215.9    3215.2    1508.4     -0.15     -0.17      2.13
        3      2.17    6447.0    6448.2    3123.3      0.03      0.05      2.06
        4      3.25    9656.8    9656.7    4743.1     -0.11     -0.11      2.04
        5      4.88   14504.1   14503.6    7296.1      0.01      0.01      1.99
        6      6.50   19324.9   19324.9    9814.6     -0.08     -0.08      1.97
        7      8.13   24178.9   24180.7   12080.0      0.03      0.03      2.00
        8     10.84   32229.1   32230.7   15839.0     -0.00      0.00      2.03
        9     13.55   40311.8   40309.1   19870.1      0.06      0.05      2.03
       10     16.25   48394.0   48398.5   24035.8      0.10      0.11      2.01
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3254 to 97602 e-
      Average count rate measured: 2975 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.02 +/-   0.01 e-/ADU
 
      RON    =   3.86 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.11/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay