*** MIDAS logfile (05SEPpl1.2) *** We, 19 Sep 2007   16:35:06   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 19 Sep 2007   16:35:20   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070919 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.84 stddev =   1.85 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070919 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1616.5    1618.7     763.3      0.06      0.09      2.12
        2      1.09    3223.1    3220.8    1559.1     -0.21     -0.24      2.07
        3      2.17    6464.1    6464.0    3179.7      0.05      0.05      2.03
        4      3.25    9679.8    9679.3    4651.2     -0.09     -0.10      2.08
        5      4.88   14532.3   14535.3    7378.9      0.01      0.02      1.97
        6      6.50   19366.6   19364.6    9614.5     -0.07     -0.07      2.01
        7      8.13   24229.9   24229.6   11873.9      0.03      0.04      2.04
        8     10.84   32300.4   32299.6   16182.6      0.02      0.02      2.00
        9     13.55   40397.7   40397.7   19966.2      0.07      0.07      2.02
       10     16.25   48500.0   48499.6   24239.7      0.13      0.12      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3240 to 97153 e-
      Average count rate measured: 2981 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.01 e-/ADU
 
      RON    =   3.71 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.12/-0.23 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay