*** MIDAS logfile (05SEPpl1.2) *** Sa, 15 Sep 2007 15:47:27 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 15 Sep 2007 15:47:41 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070915 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.79 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070915 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1615.0 1618.1 774.7 0.04 0.14 2.08 2 1.09 3217.3 3219.1 1555.5 -0.25 -0.25 2.07 3 2.17 6458.0 6457.3 3128.2 0.07 0.05 2.06 4 3.25 9668.1 9669.1 4744.7 -0.10 -0.10 2.04 5 4.88 14519.6 14517.9 7268.8 0.03 0.00 2.00 6 6.50 19345.2 19345.1 9695.0 -0.06 -0.07 2.00 7 8.13 24201.0 24204.9 12076.5 0.03 0.03 2.00 8 10.84 32263.3 32264.4 15982.7 0.02 0.01 2.02 9 13.55 40355.4 40355.4 20248.0 0.08 0.06 1.99 10 16.25 48447.2 48451.4 24431.4 0.13 0.12 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3208 to 96147 e- Average count rate measured: 2978 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.70 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.25 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay