*** MIDAS logfile (05SEPpl1.2) *** We, 05 Sep 2007   15:55:00   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 05 Sep 2007   15:55:14   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070905 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.84 stddev =   1.89 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070905 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1615.7    1613.5     767.4      0.12      0.06      2.11
        2      1.09    3213.7    3215.8    1520.9     -0.25     -0.23      2.11
        3      2.17    6450.1    6452.5    3077.5      0.06      0.08      2.10
        4      3.25    9659.5    9659.0    4614.0     -0.10     -0.10      2.09
        5      4.88   14505.7   14502.2    7200.3      0.02      0.01      2.01
        6      6.50   19323.8   19326.0    9864.8     -0.08     -0.06      1.96
        7      8.13   24181.3   24180.0   12086.1      0.04      0.03      2.00
        8     10.84   32230.0   32231.4   16122.2      0.01      0.01      2.00
        9     13.55   40314.5   40312.7   20702.3      0.07      0.07      1.95
       10     16.25   48391.4   48395.9   24202.3      0.10      0.12      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3180 to 95323 e-
      Average count rate measured: 2974 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.97 +/-   0.01 e-/ADU
 
      RON    =   3.72 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.12/-0.24 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay