*** MIDAS logfile (05SEPpl1.2) *** We, 29 Aug 2007 16:41:38 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 29 Aug 2007 16:41:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070829 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.95 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070829 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1619.3 1617.5 785.9 0.15 0.07 2.06 2 1.09 3228.6 3228.8 1574.3 -0.16 -0.15 2.05 3 2.17 6474.6 6477.8 3151.6 0.07 0.09 2.05 4 3.25 9695.3 9694.0 4773.7 -0.11 -0.12 2.03 5 4.88 14557.6 14559.1 7309.4 -0.01 0.00 1.99 6 6.50 19399.6 19399.6 9623.9 -0.09 -0.08 2.02 7 8.13 24275.5 24275.8 12285.0 0.02 0.03 1.98 8 10.84 32351.1 32353.7 16290.1 -0.02 -0.01 1.99 9 13.55 40470.4 40474.4 20571.3 0.05 0.06 1.97 10 16.25 48588.5 48589.0 24035.9 0.10 0.11 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3225 to 96813 e- Average count rate measured: 2987 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.73 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay