*** MIDAS logfile (05SEPpl1.2) *** Mo, 27 Aug 2007 14:17:27 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 27 Aug 2007 14:17:42 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070827 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 300.27 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070827 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1618.4 1615.8 755.0 0.14 0.07 2.14 2 1.09 3222.1 3218.2 1515.1 -0.18 -0.25 2.13 3 2.17 6459.9 6461.7 3109.4 0.06 0.08 2.08 4 3.25 9671.9 9672.0 4630.7 -0.11 -0.10 2.09 5 4.88 14525.8 14524.2 7205.3 0.01 0.02 2.02 6 6.50 19353.3 19352.3 9928.0 -0.08 -0.07 1.95 7 8.13 24212.9 24219.5 11991.2 0.02 0.06 2.02 8 10.84 32276.9 32273.7 16243.3 0.00 0.01 1.99 9 13.55 40370.3 40369.8 19641.7 0.06 0.08 2.06 10 16.25 48453.1 48456.4 24262.6 0.08 0.10 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3242 to 97139 e- Average count rate measured: 2979 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.79 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay