*** MIDAS logfile (05SEPpl1.2) *** Th, 09 Aug 2007   14:47:38   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 09 Aug 2007   14:47:52   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070809 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.51 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070809 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1626.1    1626.1     775.7      0.05      0.04      2.10
        2      1.09    3240.9    3242.4    1564.4     -0.21     -0.18      2.07
        3      2.17    6499.5    6502.4    3158.5      0.03      0.04      2.06
        4      3.25    9736.4    9737.0    4708.6     -0.09     -0.09      2.07
        5      4.88   14619.9   14619.8    7201.6      0.02      0.01      2.03
        6      6.50   19482.3   19479.9    9412.2     -0.05     -0.06      2.07
        7      8.13   24372.9   24371.7   12397.9      0.04      0.03      1.97
        8     10.84   32492.4   32491.2   16315.2      0.03      0.02      1.99
        9     13.55   40625.5   40629.9   20075.2      0.05      0.05      2.02
       10     16.25   48791.1   48796.1   24175.0      0.14      0.14      2.02
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3264 to 97927 e-
      Average count rate measured: 2998 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.01 +/-   0.01 e-/ADU
 
      RON    =   3.78 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.20 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay