*** MIDAS logfile (05SEPpl1.2) *** We, 25 Jul 2007   14:43:39   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 25 Jul 2007   14:43:53   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070725 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.57 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070725 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1623.8    1622.8     794.2      0.08      0.02      2.04
        2      1.09    3233.2    3236.2    1571.6     -0.23     -0.18      2.06
        3      2.17    6487.6    6488.1    3135.3      0.05      0.06      2.07
        4      3.25    9714.6    9714.3    4776.1     -0.11     -0.11      2.03
        5      4.88   14589.5   14588.7    7197.8      0.02      0.02      2.03
        6      6.50   19439.3   19437.5    9618.3     -0.06     -0.07      2.02
        7      8.13   24322.9   24321.0   12066.1      0.04      0.03      2.02
        8     10.84   32417.9   32418.3   16114.2      0.01      0.01      2.01
        9     13.55   40554.5   40556.3   20280.9      0.08      0.09      2.00
       10     16.25   48676.2   48676.3   24431.0      0.11      0.12      1.99
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3232 to 96927 e-
      Average count rate measured: 2992 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.00 e-/ADU
 
      RON    =   3.75 +/-   0.01 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.11/-0.20 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay