*** MIDAS logfile (05SEPpl1.2) *** Th, 12 Jul 2007   16:33:03   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 12 Jul 2007   16:33:17   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070712 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.46 stddev =   1.88 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070712 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1646.2    1646.0     796.3      0.07      0.05      2.07
        2      1.09    3280.6    3280.3    1551.1     -0.21     -0.21      2.11
        3      2.17    6579.0    6578.6    3156.8      0.06      0.05      2.08
        4      3.25    9850.2    9850.6    4820.3     -0.11     -0.10      2.04
        5      4.88   14793.6   14793.3    7420.7      0.02      0.02      1.99
        6      6.50   19709.0   19711.0    9933.7     -0.07     -0.06      1.98
        7      8.13   24663.6   24666.3   12450.8      0.04      0.06      1.98
        8     10.84   32869.7   32870.9   16403.2      0.00      0.01      2.00
        9     13.55   41126.1   41124.2   20338.1      0.10      0.10      2.02
       10     16.25   49349.7   49346.4   25615.8      0.10      0.09      1.93
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3219 to 96503 e-
      Average count rate measured: 3034 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.96 +/-   0.02 e-/ADU
 
      RON    =   3.68 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.10/-0.21 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay