*** MIDAS logfile (05SEPpl1.2) *** Sa, 07 Jul 2007   16:39:20   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 07 Jul 2007   16:39:35   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070707 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 300.24 stddev =   1.90 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070707 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1631.4    1634.0     788.4      0.11      0.15      2.07
        2      1.09    3255.9    3258.1    1556.5     -0.11     -0.10      2.09
        3      2.17    6529.3    6526.7    3120.4      0.04      0.01      2.09
        4      3.25    9778.6    9781.5    4720.8     -0.10     -0.08      2.07
        5      4.88   14681.0   14682.0    7125.3     -0.02     -0.02      2.06
        6      6.50   19564.1   19565.7    9763.1     -0.09     -0.09      2.00
        7      8.13   24470.3   24472.3   12539.0     -0.02     -0.03      1.95
        8     10.84   32640.8   32643.3   16410.3      0.02      0.02      1.99
        9     13.55   40788.6   40793.9   20528.7     -0.01     -0.01      1.99
       10     16.25   49031.8   49034.3   24501.1      0.17      0.16      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3235 to 97140 e-
      Average count rate measured: 3012 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.01 e-/ADU
 
      RON    =   3.76 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.11 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay