*** MIDAS logfile (05SEPpl1.2) *** Su, 01 Jul 2007 13:28:38 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 01 Jul 2007 13:28:52 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070701 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 300.05 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070701 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1623.4 1623.5 756.3 0.04 0.05 2.15 2 1.09 3233.1 3231.5 1587.8 -0.22 -0.27 2.04 3 2.17 6486.9 6484.6 3017.1 0.07 0.06 2.15 4 3.25 9710.7 9710.5 4694.4 -0.10 -0.10 2.07 5 4.88 14585.9 14584.1 7129.7 0.04 0.03 2.05 6 6.50 19429.0 19431.8 9801.9 -0.07 -0.06 1.98 7 8.13 24314.4 24314.3 12009.1 0.05 0.06 2.02 8 10.84 32401.6 32402.9 15712.4 0.00 0.01 2.06 9 13.55 40541.0 40545.3 20287.0 0.10 0.11 2.00 10 16.25 48652.7 48651.1 24864.6 0.11 0.11 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3203 to 95986 e- Average count rate measured: 2991 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.02 e-/ADU RON = 3.68 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.24 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay