*** MIDAS logfile (05SEPpl1.2) *** Fr, 15 Jun 2007 15:04:18 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 15 Jun 2007 15:04:32 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070615 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.49 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070615 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1649.8 1647.4 784.6 0.12 0.19 2.10 2 1.09 3280.4 3279.8 1561.6 -0.26 -0.22 2.10 3 2.17 6575.5 6575.4 3110.0 0.00 0.01 2.11 4 3.25 9848.5 9849.1 4798.1 -0.11 -0.12 2.05 5 4.88 14791.3 14789.4 7192.7 0.02 -0.00 2.06 6 6.50 19705.5 19709.8 9772.3 -0.06 -0.07 2.02 7 8.13 24656.9 24655.5 12343.2 0.04 0.01 2.00 8 10.84 32869.6 32874.3 16281.1 0.03 0.02 2.02 9 13.55 41101.7 41102.0 20034.4 0.07 0.04 2.05 10 16.25 49359.5 49358.8 24548.9 0.15 0.12 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3323 to 99483 e- Average count rate measured: 3033 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.01 e-/ADU RON = 3.75 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.24 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay