*** MIDAS logfile (05SEPpl1.2) *** Th, 07 Jun 2007 14:14:57 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 07 Jun 2007 14:15:10 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070607 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.91 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070607 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 7.6 7.6 7.8 -309.05 -310.14 0.97 2 1.09 15.0 15.1 11.8 233.74 235.51 1.28 3 2.17 30.1 29.9 20.4 44.46 43.73 1.48 4 3.25 44.7 44.7 26.8 20.34 20.32 1.67 5 4.88 68.2 68.1 39.9 10.62 10.48 1.71 6 6.50 90.4 90.4 47.9 4.88 5.03 1.89 7 8.13 112.9 112.8 73.0 2.02 1.98 1.55 8 10.84 149.7 149.9 76.0 -1.15 -0.97 1.97 9 13.55 187.4 187.3 98.8 -2.53 -2.55 1.90 10 16.25 225.3 225.1 110.9 -3.34 -3.38 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 16 to 464 e- Average count rate measured: 15 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.06 +/- 0.09 e-/ADU RON = 3.91 +/- 0.18 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.787 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = +234.63/-309.60 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay