*** MIDAS logfile (05SEPpl1.2) *** Fr, 01 Jun 2007 16:02:15 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 01 Jun 2007 16:02:29 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070601 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.87 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070601 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1678.5 1678.1 793.6 0.09 0.05 2.12 2 1.09 3340.1 3340.9 1593.0 -0.26 -0.25 2.10 3 2.17 6703.6 6704.1 3204.7 0.06 0.07 2.09 4 3.25 10034.8 10035.2 4971.9 -0.11 -0.09 2.02 5 4.88 15070.0 15070.2 7398.0 0.01 0.02 2.04 6 6.50 20081.0 20079.9 9677.9 -0.06 -0.06 2.07 7 8.13 25126.0 25123.6 12223.0 0.04 0.04 2.06 8 10.84 33491.7 33490.5 16879.7 0.02 0.02 1.98 9 13.55 41890.1 41887.7 20682.0 0.08 0.08 2.03 10 16.25 50289.4 50289.8 24678.3 0.13 0.13 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3392 to 101654 e- Average count rate measured: 3091 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.01 e-/ADU RON = 3.76 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.25 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay