*** MIDAS logfile (05SEPpl1.2) *** Th, 24 May 2007 15:25:30 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 24 May 2007 15:25:44 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070524 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.74 stddev = 1.85 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070524 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1675.3 1673.8 828.6 0.09 0.07 2.02 2 1.09 3335.4 3335.4 1583.5 -0.20 -0.21 2.11 3 2.17 6689.3 6690.2 3172.2 0.06 0.07 2.11 4 3.25 10016.3 10017.4 4881.0 -0.10 -0.09 2.05 5 4.88 15039.4 15041.7 7460.1 -0.00 0.01 2.02 6 6.50 20042.5 20039.0 10170.2 -0.07 -0.08 1.97 7 8.13 25079.4 25076.3 12321.6 0.04 0.04 2.04 8 10.84 33420.2 33423.3 16732.7 -0.00 0.01 2.00 9 13.55 41813.5 41810.1 20938.0 0.08 0.08 2.00 10 16.25 50178.7 50180.5 25286.3 0.09 0.10 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3319 to 99449 e- Average count rate measured: 3085 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.66 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay