*** MIDAS logfile (05SEPpl1.2) *** Tu, 22 May 2007 15:19:29 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Tu, 22 May 2007 15:19:43 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070522 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.64 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070522 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1674.5 1675.6 788.2 0.05 0.08 2.12 2 1.09 3333.4 3337.4 1589.6 -0.25 -0.18 2.10 3 2.17 6689.0 6689.4 3211.2 0.04 0.04 2.08 4 3.25 10020.9 10019.7 4920.3 -0.07 -0.09 2.04 5 4.88 15045.0 15041.9 7204.4 0.02 0.00 2.09 6 6.50 20049.4 20047.9 9920.9 -0.04 -0.06 2.02 7 8.13 25077.2 25078.9 12745.6 0.02 0.02 1.97 8 10.84 33437.1 33436.7 16550.9 0.03 0.02 2.02 9 13.55 41807.7 41807.3 20587.8 0.06 0.04 2.03 10 16.25 50210.2 50210.3 25328.7 0.14 0.13 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3335 to 99964 e- Average count rate measured: 3085 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.69 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay