*** MIDAS logfile (05SEPpl1.2) *** We, 02 May 2007 14:27:43 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 02 May 2007 14:27:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070502 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.51 stddev = 1.85 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070502 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1682.5 1682.2 796.3 0.15 0.13 2.11 2 1.09 3353.9 3355.9 1566.5 -0.21 -0.14 2.14 3 2.17 6728.0 6726.5 3203.1 0.06 0.03 2.10 4 3.25 10072.1 10072.7 4891.4 -0.15 -0.14 2.06 5 4.88 15126.6 15127.6 7377.5 -0.02 -0.02 2.05 6 6.50 20156.1 20157.0 10305.6 -0.11 -0.11 1.96 7 8.13 25226.1 25222.9 12897.6 0.01 -0.00 1.96 8 10.84 33610.7 33613.2 17035.8 -0.05 -0.05 1.97 9 13.55 42058.4 42059.9 20843.9 0.05 0.05 2.02 10 16.25 50571.6 50570.7 24511.3 0.25 0.25 2.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3406 to 102371 e- Average count rate measured: 3104 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.02 e-/ADU RON = 3.75 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.25/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay