*** MIDAS logfile (05SEPpl1.2) *** Sa, 28 Apr 2007   15:14:08   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 28 Apr 2007   15:14:22   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070428 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.50 stddev =   1.84 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070428 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1689.6    1689.8     804.7      0.12      0.14      2.10
        2      1.09    3362.8    3360.5    1585.5     -0.21     -0.25      2.12
        3      2.17    6743.7    6747.2    3261.7      0.04      0.08      2.07
        4      3.25   10100.9   10098.1    4937.6     -0.10     -0.12      2.05
        5      4.88   15166.5   15168.1    7380.8      0.01      0.02      2.05
        6      6.50   20205.8   20207.4    9924.6     -0.08     -0.07      2.04
        7      8.13   25283.9   25285.7   12772.5      0.03      0.03      1.98
        8     10.84   33704.0   33702.2   17000.5      0.01      0.00      1.98
        9     13.55   42159.3   42156.1   20893.9      0.07      0.07      2.02
       10     16.25   50610.1   50606.2   25490.5      0.11      0.11      1.99
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3351 to 100380 e-
      Average count rate measured: 3111 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.01 e-/ADU
 
      RON    =   3.66 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.13/-0.23 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay