*** MIDAS logfile (05SEPpl1.2) *** Mo, 23 Apr 2007 15:23:12 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 23 Apr 2007 15:23:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070423 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.44 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070423 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1690.4 1689.3 804.3 0.04 0.12 2.10 2 1.09 3369.8 3370.3 1618.1 -0.21 -0.15 2.08 3 2.17 6761.5 6760.1 3554.2 0.07 0.08 1.90 4 3.25 10121.5 10122.9 4948.8 -0.10 -0.10 2.05 5 4.88 15199.0 15201.2 7376.0 0.02 0.01 2.06 6 6.50 20251.1 20254.2 10126.6 -0.07 -0.08 2.00 7 8.13 25337.5 25341.6 12751.0 0.03 0.01 1.99 8 10.84 33777.3 33778.8 16738.1 0.01 -0.01 2.02 9 13.55 42249.9 42249.4 21368.0 0.08 0.05 1.98 10 16.25 50718.8 50716.2 25198.2 0.12 0.08 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3378 to 101370 e- Average count rate measured: 3118 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.01 e-/ADU RON = 3.73 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay